Best picks

Best 15x15 Heat Presses for Sublimation: Top 9 Picks (November 2026)

Updated on · By the Indie Spotting team

The best 15x15 heat presses for sublimation include the PowerPress Industrial-Quality Digital Sublimation Heat Press Machine (best overall for sublimation), the PlanetFlame 15x15 Heat Press Machine for T-Shirts for easy shirt loading, and the AKEYDIY Professional 8 in 1 Heat Press (best combo for mugs and caps).

On this page (4 sections)
  1. The best 15x15 heat presses for sublimation projects
  2. How these 15x15 heat presses were compared
  3. What should you check before buying a 15x15 sublimation press?
  4. Which 15x15 heat press is best for your sublimation work?

The best 15x15 heat press machine for sublimation for most people is the PowerPress Industrial-Quality Digital Sublimation Heat Press Machine. Its 15x15 inch Teflon-coated plate, removable silicon mat and bottom handle make daily shirt pressing simple and safe.

Pick the PlanetFlame if you want a pull-out drawer, the AKEYDIY 8-in-1 for mugs and caps, or the HTVRONT Auto Press 2 for hands-free cycles.

Sublimation asks a lot of a press. The plate has to reach an even temperature across the full 15 inches, hold steady pressure, and stay clean so stray ink and lint don't mark the next shirt.

A flat 15x15 press covers adult shirt fronts in one pass, and that is why it's the size most crafters land on first.

Our score weighs specs, features and buyer feedback against what you're shopping for. We checked the plate coating, heat range, pressure control and safety features on each model, then matched them to the way sublimation work actually runs.

Nothing here was tested in a studio.

If you want to see the wider field first, our guide to the best 15x15 heat press covers flat presses of this size. For a folding design instead, read the clamshell heat press roundup.

Curved blanks like tumblers get their own pick in our list of sublimation tumbler heat press machines.

Our picks at a glance

  1. 1 PowerPress Industrial-Quality Digital Sublimation Heat Press Machine
  2. 2 PlanetFlame 15x15 Heat Press Machine for T-Shirts
    Best for easy shirt loading

    PlanetFlame 15x15 Heat Press Machine for T-Shirts

    9.7/10 our score

    See it on Amazon
  3. 3 AKEYDIY Professional 8 in 1 Heat Press
    Best combo for mugs and caps

    AKEYDIY Professional 8 in 1 Heat Press

    9.0/10 our score

    See it on Amazon
  1. 4HTVRONT Auto Heat Press 2 15x15

    HTVRONT Auto Heat Press 2 15x15

    Best for hands-free pressing
    Check it
  2. 5Hitgrand Heat Press 15x15 inch

    Hitgrand Heat Press 15x15 inch

    Best for mixed craft projects
    Check it
  3. 6HTVRONT Auto Heat Press 15x15

    HTVRONT Auto Heat Press 15x15

    Best for small-batch sellers
    Check it
  4. 7Delclynee 15x15 High Pressure Clamshell

    Delclynee 15x15 High Pressure Clamshell

    Best clamshell for thick garments
    Check it
  5. 8RoyalPress 15x15 LED Digital Press

    RoyalPress 15x15 LED Digital Press

    Best for production counting
    Check it
  6. 9BetterSub 15x15 LCD Clamshell

    BetterSub 15x15 LCD Clamshell

    Best budget clamshell
    Check it

The best 15x15 heat presses for sublimation projects

The PowerPress takes the top spot for flat fabric work, while each other pick here solves a specific need. Some add drawers or swing arms for easier loading, and some bundle mug and cap attachments.

Match the press to your most common project before you compare extra features.

1

PowerPress Industrial-Quality Digital Sublimation Heat Press Machine: Best overall for sublimation

PowerPress Industrial-Quality Digital Sublimation Heat Press Machine, 15x15 heat presses for sublimation
9.7/10Our score
  • 15x15 inch Teflon-coated plate
  • Removable silicon mat
  • 32-455 F temperature range
  • Replaceable fuse

A flat 15x15 press with a Teflon plate and a mat that lifts off for cleaning or replacement. The bottom handle helps you open a hot plate safely.

See it on Amazon

Pros

  • Teflon-coated 15x15 plate
  • Washable, replaceable silicon mat
  • Bottom handle for opening a hot press
  • Replaceable fuse protects the machine

Cons

  • Heavier frame than compact clamshells
  • Manual handle press needs your hands on it

PowerPress suits the crafter who presses shirts and flat blanks most days and wants a simple, sturdy flat press. Its 15x15 inch Teflon-coated plate gives you full coverage on adult shirt fronts, and the digital board runs from 32 F to 455 F with a 0-999 second timer.

The detail that sets it apart for sublimation is the removable silicon mat. It isn't glued to the bottom board, so you can lift it off to wash after a messy transfer or replace it when it wears.

That keeps the pressing surface flat and clean, which matters when faint ink marks would show through light fabric. Being able to move or reattach the mat also lets you work right to the edge of the lower platen without fighting a fixed pad.

A bottom handle helps you lift the hot plate when the frame shifts slightly with heat, and PowerPress uses a patented control chip plus a replaceable fuse to protect against overheating and shorts. The trade-off is weight: at 36 lb in a metal frame, it's not the press you carry to a craft fair.

Leave it set up on a solid bench.

Buy it if you want a dependable flat press for sublimation shirts and blanks. Look at the PlanetFlame instead if a pull-out drawer would make your loading routine easier.

PowerPress Industrial-Quality Digital Sublimation Heat Press MachineCheck it on Amazon
2

PlanetFlame 15x15 Heat Press Machine for T-Shirts: Best for easy shirt loading

PlanetFlame 15x15 Heat Press Machine for T-Shirts, 15x15 heat presses for sublimation
9.7/10Our score
  • Slide-out drawer plate
  • Teflon nonstick surface
  • Adjustable pressure knob
  • Auto shut-off fuse

A drawer-style clamshell that slides the shirt out from under the plate, so you load and unload without reaching into a hot gap.

See it on Amazon

Pros

  • Pull-out tray for flat blanks
  • Teflon nonstick plate
  • Adjustable pressure knob
  • Built-in safety fuse

Cons

  • Lower top temperature than the PowerPress
  • Bigger footprint than a fixed clamshell

PlanetFlame ties the PowerPress on score and brings a different loading style. Its slide-out drawer pulls the plate forward so you lay the shirt flat, close the press, and slide it back in.

That keeps your hands out of the hot gap and speeds up back-to-back shirts.

The plate is Teflon nonstick and rated to 390 F with a 1350 W element. That ceiling sits below the PowerPress, but sublimation on polyester runs well under 400 F, so it covers normal fabric work without strain.

An adjustable pressure knob lets you dial in contact for thick and thin blanks, and PlanetFlame notes that uneven pressing usually comes down to pressure set wrong for the material's thickness.

A built-in safety fuse shuts the press down if temperatures climb too far. PlanetFlame offers a 365-day warranty.

The drawer adds footprint and a bit of weight at 44.3 lb, so plan bench depth before you buy. Because the tray carries flat items like bags and ceramic tiles as well as shirts, it suits mixed flat blanks better than a fixed plate.

Choose it for drawer loading and even pressure on tees and tote bags. Skip the drawer if you press large rigid blanks that need a wide, open plate.

PlanetFlame 15x15 Heat Press Machine for T-ShirtsCheck it on Amazon
3

AKEYDIY Professional 8 in 1 Heat Press: Best combo for mugs and caps

AKEYDIY Professional 8 in 1 Heat Press, 15x15 heat presses for sublimation
9.0/10Our score
  • 12x15 inch swing-away plate
  • Mug, cap and plate attachments
  • 360-degree rotation
  • Double heating tube

An 8-in-1 kit that adds mug, cap and plate presses to a 12x15 swing-away flat press. The plate is slightly smaller than the 15x15 models here.

See it on Amazon

Pros

  • Mug, cap and plate accessories included
  • Swing-away arm keeps the plate off the shirt
  • Double heating tube for even heat
  • Teflon-coated plate

Cons

  • 12x15 plate is smaller than 15x15
  • Only 800 W

AKEYDIY is the pick when your sublimation work spreads across mugs, caps and plates as well as shirts. The kit includes a 12x15 inch swing-away flat press plus cap, mug and plate attachments, so one machine covers most small gift projects without the cost and bench space of several machines.

The swing-away arm rotates the heated plate 360 degrees and lifts it clear, which makes placing a shirt or blank easier and keeps your hands away from the heat. A double heating tube keeps the temperature difference between the center and edges to about 5 degrees, and the Teflon-coated plate guards against scorching.

The press-casting aluminum plate is thickened, and AKEYDIY says the surface stays far cooler than the working temperature when it reaches 200 F.

The catch is size. The flat plate is 12x15, a little shorter than the 15x15 presses here, so very wide designs need care in placement.

The 800 W element also heats more slowly than the 1400 W models. AKEYDIY covers it with a 365-day manufacturer warranty and UL and FCC certification.

The brand also states a 12x15 plate handles large hoodies and tees, so smaller blanks are easy.

Buy it for a first multi-craft setup that includes curved blanks. Go with a dedicated 15x15 press if flat shirts are your main output.

AKEYDIY Professional 8 in 1 Heat PressCheck it on Amazon
4

HTVRONT Auto Heat Press 2 15x15: Best for hands-free pressing

HTVRONT Auto Heat Press 2 15x15, 15x15 heat presses for sublimation
8.7/10Our score
  • Automatic press and release
  • Adjustable pressure up to 80 kg
  • 4.5 cm height clearance
  • Angle-adjustable screen

A motorized 15x15 press that lowers the plate, holds pressure and releases on its own. The raised height fits thicker blanks like hoodies.

See it on Amazon

Pros

  • Automatic press and release
  • Pressure adjustable up to 80 kg
  • Fits blanks up to 4.5 cm thick
  • Screen tilts through 7 angles

Cons

  • Needs more clearance above the machine
  • Higher price tier than manual presses

The HTVRONT Auto Press 2 is for crafters who want the machine to do the pressing. After you set time and temperature and press the "R" button, the motorized plate lowers, holds pressure and releases on its own, so you can prep the next design while a shirt presses.

A buzz tells you when the cycle ends.

Pressure adjusts up to 80 kg (170 lb), which suits DTF and dense sublimation work that needs firm contact. HTVRONT raised the pressing height to 4.5 cm (1.77 in), so thick hoodies fit under the plate.

The NTC thermistor and dual-tube engine bring it to 410 F in about 5 minutes and 30 seconds, and HTVRONT says that saves up to 30 percent of waiting time compared with other auto presses.

The angle-adjustable screen tilts through seven positions from 0 to 75 degrees, so you can read it without leaning over the hot plate. The press shuts off after 15 minutes idle.

The trade-offs are clearance and cost: the automatic arm needs room above it, and it sits in a higher price tier than the manual presses here. The hands-free release also removes the burned-project risk that comes from forgetting a manual press.

Pick it for hands-free batches and thick garments. Stay with a manual press if you want the lowest-cost route to 15x15 sublimation.

HTVRONT Auto Heat Press 2 15x15Check it on Amazon
5

Hitgrand Heat Press 15x15 inch: Best for mixed craft projects

Hitgrand Heat Press 15x15 inch, 15x15 heat presses for sublimation
8.6/10Our score
  • 15x15 inch plate
  • 5-in-1 kit with 30 oz tumbler press
  • 360-degree swing-away
  • Slide-out bottom platform

A 5-in-1 set that pairs a 15x15 flat press with a 30 oz tumbler attachment, hat press and two plate presses for sublimation on curved blanks.

See it on Amazon

Pros

  • 15x15 plate plus tumbler, hat and plate presses
  • Swing-away arm and slide-out platform
  • Teflon-coated aluminum plate
  • Two Teflon sheets included

Cons

  • More accessories to store
  • Swing arm needs side clearance

Hitgrand bundles the most into one box. The 15x15 inch flat plate handles shirts, while a 30 oz tumbler press with a 10.6-inch detachable attachment covers skinny tumblers and straight mugs from 2.65 to 3.4 inches in diameter.

A hat press and two plate presses round out the 5-in-1 set.

The plate is die-cast aluminum with a Teflon coating, and two Teflon sheets come in the box to protect vinyl and clothes. A 360-degree swing-away arm and a slide-out bottom platform keep your hands away from the heat during loading.

The second-generation control box runs 30 F to 450 F with a "MODE" button for sublimation settings and holds a constant temperature once the preset time is reached.

The accessory count is the trade-off. Mug, cap and plate presses take up shelf space, and the swing arm needs side clearance.

Hitgrand backs it with a 2-year warranty. Choose it when you want flat shirts and curved blanks from one purchase.

Hitgrand Heat Press 15x15 inchCheck it on Amazon
6

HTVRONT Auto Heat Press 15x15: Best for small-batch sellers

HTVRONT Auto Heat Press 15x15, 15x15 heat presses for sublimation
8.4/10Our score
  • Automatic press and release
  • Auto-adjusts to blanks up to 1 in
  • Four fast modes and two custom modes
  • 15-minute auto-off

The first-generation HTVRONT auto press with preset and custom modes. The drawer slide keeps hands away from the hot plate.

See it on Amazon

Pros

  • Preset and custom modes
  • Auto release when the timer ends
  • Slide-out drawer design
  • Auto-off after 15 minutes idle

Cons

  • 1 in thickness limit is lower than the Auto Press 2
  • Older model with fewer pressure settings

The original HTVRONT Auto Press is a solid choice for small-batch sellers who want automation without the newest model's price. It auto-adjusts to blanks up to 1 in thick and releases when the timer ends.

The drawer slide keeps hands clear of the plate.

Four fast modes and two custom modes make repeat jobs quicker to start. HTVRONT says the press reaches 320 F in under 4 minutes and heats to 410 F about 130 seconds faster than other auto presses.

The ironing board is separated from the heating plate, which is safer around kids and pets, and it shuts off after 15 minutes idle.

Against the Auto Press 2, its 1 in thickness limit is the main gap: thick hoodies and layered blanks fit better under the newer model's 4.5 cm clearance. The pressure range is also less adjustable.

Still, for flat shirts, totes, wood signs and ceramic coasters up to 1 inch thick, this press covers the job. It carries FCC certification and HTVRONT lists 24/7 support.

Buy it if you press shirts in small runs and want auto release. Step up to the Auto Press 2 for thicker blanks and higher pressure.

HTVRONT Auto Heat Press 15x15Check it on Amazon
7

Delclynee 15x15 High Pressure Clamshell: Best clamshell for thick garments

Delclynee 15x15 High Pressure Clamshell, 15x15 heat presses for sublimation
7.8/10Our score
  • 15x15 inch plate
  • Automatic floatation top plate
  • Threadable lower platen
  • Audible 5-beep alert

A clamshell with a self-balancing top plate and an open lower platen for threading shirts. The base is fixed, so there is no drawer to slide.

See it on Amazon

Pros

  • Self-balancing top plate for uneven surfaces
  • Threadable lower platen
  • Audible alert at temperature and at time-up
  • Fitted lower pad cover

Cons

  • Fixed base, no slide-out drawer
  • Clamshell opening needs overhead clearance

Delclynee is the clamshell pick for garments that fight back. Its automatic floatation top plate balances itself over uneven surfaces and thicker items, so pressure stays even across the design.

The lower platen is open underneath for threading a shirt onto a single layer.

The 15x15 plate runs 32 F to 455 F with a 1250 W element and an adjustable pressure knob. An audible 5-beep signal tells you when the target temperature is reached or the countdown ends, so you don't have to watch the gauge.

A fitted lower pad cover keeps the base clean and stops the pad shifting as you load and unload, and a secondary handle on the base adds stability during high-pressure work.

The base is fixed, so there's no drawer to slide the shirt out. A clamshell also opens upward and needs overhead clearance.

For thick hoodies and stacked garments, though, the self-balancing plate is a real advantage. The fixed base also gives a sturdier foundation for the high-pressure transfers this model is built around.

Choose it for thick or uneven blanks where even pressure matters. Pick the PlanetFlame for drawer loading on flat tees.

Delclynee 15x15 High Pressure ClamshellCheck it on Amazon
8

RoyalPress 15x15 LED Digital Press: Best for production counting

RoyalPress 15x15 LED Digital Press, 15x15 heat presses for sublimation
7.7/10Our score
  • 15x15 inch Teflon plate
  • Temperature, time and counter controller
  • Thickened aluminum plate
  • 0-999 second timer

A flat press with a color LED controller that counts finished pieces as well as setting time and temperature. Useful when you press in batches.

See it on Amazon

Pros

  • Built-in piece counter
  • Wide 0-480 F range
  • Thickened aluminum plate for even heat
  • No separate Teflon sheet needed

Cons

  • Plain clamshell without a drawer
  • Higher top end than sublimation fabrics usually need

RoyalPress is built for people who track output. Its color LED controller handles temperature, time and a piece counter from 0 to 999, so you can see how many shirts a batch has run.

That helps when you fill custom orders or price your work.

The plate is thickened aluminum with a Teflon coating, and RoyalPress says you don't need a separate coated sheet. The heat range runs 0 to 480 F, wider than most sublimation fabrics need, and the timer goes to 999 seconds.

A memory function keeps your settings between jobs, and the controller handles all three values in one panel.

It's a plain clamshell without a drawer or swing arm, so loading means reaching under the plate. The 480 F ceiling is more than polyester sublimation asks for, and the press is aimed at commercial use as well as home crafting.

The 1400 W element matches the PowerPress on power. Buy it if counting finished pieces matters more than loading convenience.

RoyalPress 15x15 LED Digital PressCheck it on Amazon
9

BetterSub 15x15 LCD Clamshell: Best budget clamshell

BetterSub 15x15 LCD Clamshell, 15x15 heat presses for sublimation
7.2/10Our score
  • 15x15 inch Teflon plate
  • LCD digital control
  • Solid-state relay
  • 0-440 F range

An entry-level clamshell with an LCD controller and a solid-state relay. It covers the basics for shirts and flat blanks at a budget tier.

See it on Amazon

Pros

  • Teflon-coated plate
  • Solid-state relay for voltage spikes
  • LCD display for time and temperature
  • Lowest price tier here

Cons

  • Fewer features than the higher-scored presses
  • Shorter timer range than some rivals

BetterSub is the budget entry to 15x15 sublimation. Its Teflon-coated plate runs 0 to 440 F with an LCD controller for time and temperature.

For simple shirt fronts and flat blanks, it covers the core job at the lowest price tier here.

A solid-state relay protects the electronics from voltage spikes and lowers fire risk during long sessions. That's a useful safety feature at this price.

The plate is 15x15 with a 1300 W element. BetterSub points out that a press reaches higher, steadier heat than an iron, which is what sublimation ink needs to bond into polyester fibers.

The gaps show against the higher-scored presses: fewer features, a shorter timer range, and no drawer or swing arm. It also lacks the auto release and self-balancing plate of the pricier picks.

It's a clamshell, so it opens upward and needs overhead clearance. Buy it if you press occasional shirts on a tight budget.

Spend more if you press daily or need thicker blanks.

BetterSub 15x15 LCD ClamshellCheck it on Amazon

How these 15x15 heat presses were compared

We started with the plate itself. A 15x15 inch Teflon-coated surface covers adult shirt fronts and handles flat blanks like bags, tiles and coasters.

Coating quality matters for sublimation because a clean plate prevents scorch marks and stray ink from marring the next transfer. A removable mat or included Teflon sheets count in a press's favor because they protect the plate and your fabric.

Next we checked heat control. Every press here uses a digital board with a settable timer.

The differences show in range and steadiness: the PowerPress and Delclynee reach 455 F, while the PlanetFlame tops out at 390 F. For polyester sublimation, anything in the 350 to 400 F band works, so a higher ceiling matters more for HTV and mixed materials.

A double heating tube, which several models here use, narrows the gap between center and edge temperature.

Pressure came third. Manual presses use a knob or spring, while the HTVRONT models lower the plate automatically.

Adjustable pressure matters for thick seams, hoodies and layered blanks. A self-balancing plate, like Delclynee's, helps when the garment isn't perfectly flat.

Auto-release on the HTVRONT presses removes the burned-project risk of a manual press left closed too long.

We also weighed loading design. A slide-out drawer, a swing-away arm or a fixed base each changes how you handle a hot plate.

Drawers and swing arms keep hands clear of heat. Fixed clamshells take less floor space but need overhead clearance.

Finally, we looked at safety and support features: replaceable fuses, auto shut-off, solid-state relays, Teflon sheets and warranty length. Then we ranked each press against what a sublimation crafter needs most.

What should you check before buying a 15x15 sublimation press?

Start with your main project. If you press flat shirts and blanks, a fixed or drawer press works well.

If you also make mugs and caps, a combo kit saves buying separate machines. Thick hoodies push you toward an auto press with extra height.

The checklist below follows the same order we used to rank these presses.

Is a drawer or swing-away press better for shirts?

Both keep your hands off the hot plate, so the choice comes down to bench space. A drawer pulls the shirt forward and needs depth in front of the machine.

A swing-away arm moves the plate to the side and needs clearance beside it. A fixed clamshell takes the least room but asks you to reach in.

For high shirt volume, the drawer tends to be faster because the plate stays put.

Do you need an auto press for sublimation?

You don't need one. Manual presses produce good sublimation results when the pressure is set right.

An auto press helps when you press many shirts in a row, want hands-free cycles, or press thick garments. The HTVRONT Auto Press 2's 80 kg pressure range and 4.5 cm clearance suit heavier blanks, while the original Auto Press caps at 1 inch thick.

How much plate temperature range matters

For polyester sublimation, a top end near 400 F is plenty. A 455 F or 480 F ceiling gives you room for HTV, DTF and other transfers.

If shirts are your only project, the PlanetFlame's 390 F range covers it and saves you paying for heat you won't use. A wider range also helps when you press a mix of fabric and hard blanks in one session.

What accessories come with a combo press?

Combo kits bundle mug, cap and plate presses. The Hitgrand 5-in-1 adds a 30 oz tumbler press, a hat press and two plate presses to its 15x15 flat plate.

The AKEYDIY 8-in-1 adds mug, cap and plate presses to a 12x15 swing-away flat press. Check which blanks you actually make before paying for attachments, since each one needs its own storage space.

How to keep sublimation prints from scorching

Use a Teflon-coated plate or a Teflon sheet between the paper and the heat, and press at the ink maker's recommended temperature. Keep pressure even and avoid overlong dwell times.

A clean plate and a fresh sheet protect light fabrics from marks. A press that holds a steady temperature, like the dual-tube models here, also reduces the chance of a hot spot scorching one part of the design.

Which press fits a small craft room?

A fixed clamshell like the Delclynee or BetterSub takes the least floor and side space, though it needs room above to open. A drawer press needs bench depth in front.

An auto press needs overhead clearance for its lifting arm. Measure your space before you choose.

If your bench is deep but narrow, a drawer press often fits where a swing arm won't.

Which 15x15 heat press is best for your sublimation work?

The PowerPress Industrial-Quality Digital Sublimation Heat Press Machine is the best 15x15 heat press machine for sublimation for most crafters. Its Teflon plate, removable silicon mat and bottom handle make daily flat pressing safe and simple, and it covers full shirt fronts in one pass.

Choose it unless a specific feature pulls you elsewhere.

Pick the PlanetFlame when a pull-out drawer would speed up your shirt routine. The AKEYDIY 8-in-1 makes sense if mugs and caps are part of your output.

The HTVRONT Auto Press 2 wins for hands-free batches and thick garments, and the Hitgrand 5-in-1 suits crafters who want flat and curved blanks from one box. For thick, uneven garments, the Delclynee's self-balancing plate is the reason to choose it.

If you're still deciding between press styles, read our swing away heat press guide for the loading differences. Whichever you choose, match the plate, pressure and clearance to the blanks you press most, and your sublimation results will stay consistent.

Our top 3 picks at a glance

  1. 1 PowerPress Industrial-Quality Digital Sublimation Heat Press Machine
  2. 2 PlanetFlame 15x15 Heat Press Machine for T-Shirts
    Best for easy shirt loading

    PlanetFlame 15x15 Heat Press Machine for T-Shirts

    9.7/10 our score

    See it on Amazon
  3. 3 AKEYDIY Professional 8 in 1 Heat Press
    Best combo for mugs and caps

    AKEYDIY Professional 8 in 1 Heat Press

    9.0/10 our score

    See it on Amazon

Frequently asked questions

Is a 15x15 heat press big enough for adult shirts?

Yes. A 15x15 inch plate covers the full front print area on most adult tees, including large chest designs.

For an all-over print that wraps the shirt, you need a larger platen or a different press style.

Why does sublimation need even pressure?

Sublimation ink turns to gas under heat and needs firm, even contact to transfer into polyester fibers. Light or patchy pressure leaves faded spots, so an adjustable pressure knob or auto press helps keep results consistent.

Can I use a 15x15 heat press for HTV and DTF too?

Yes. A flat 15x15 press handles HTV, DTF film, heat transfer paper and sublimation paper on flat blanks.

The settings change by material, so follow the ink or film maker's time and temperature chart.

Do I need a drawer or swing-away press for sublimation?

Neither is required, but both keep your hands clear of the hot plate. A drawer slides the shirt out from under the plate, while a swing-away arm moves the plate to the side.

Choose whichever suits your workbench space.

What thickness can an auto heat press handle?

The HTVRONT Auto Press 2 clears blanks up to 4.5 cm, about 1.77 in, while the earlier HTVRONT Auto Press handles up to 1 in. That difference matters for thick hoodies and layered projects.

How do I protect sublimation prints from scorching?

Use a Teflon-coated plate or a Teflon sheet between the plate and the paper, and keep the press at the ink maker's recommended temperature. A coated surface and steady pressure reduce scorch marks on polyester.